03 / WELDING FUMES

Welding fume extraction.
Captured at the torch.

Articulated arms, downdraft tables, robotic cell hoods and filter extractors: we capture fumes at the workstation, from manual welders to robots, then filter them with mobile extractors or a centralised network with fan and activated carbon.

03welding fumes
1 000–3 000m³/h per mobile extractor
MIG · MAG · TIGand plasma cutting
Capture at the workstation

At the torch, before it reaches the welder's face

Filtering extractors

Built-in pre-filter and high-efficiency filter

From manual to robotic

Single workstation, workshop or robotic cell

Carcinogenic fumes

Classified Group 1 by the IARC since 2017

WHAT'S AT STAKE

Fumes not to be breathed.

Ultrafine metal particles and gases: welding fumes rise straight towards the welder's face. Only capture placed as close as possible to the arc stops them before they are inhaled.

Have my workshop assessed
  • HealthCarcinogenic fumes

    Since 2017, IARC has classified welding fumes as carcinogenic to humans (Group 1).

  • RegulationsCapture at the source

    Occupational health rules require pollutants to be captured as close as possible to their point of emission, before they reach the operator.

  • WorkshopClear air, clear view

    Less fume in suspension: better visibility, neighbouring workstations protected, cleaner premises.

CAPTURE AT THE WORKSTATION

As close as possible to the arc.

The capture device follows the welder's movements and the size of the parts: arms for manual workstations, tables for small parts, built-in hoods for robots.

  • Articulated arms — welding fume capture
    Manual workstation

    Articulated arms

    Swivelling, self-supporting arms brought above the weld, then repositioned for each part.

  • Downdraft tables — welding fume capture
    Workstation and worktop

    Downdraft tables

    The table doubles as a workstation: fumes are extracted through the worktop and the backboard. ST 120, ST 150 and SV ranges.

  • Robotic cells — welding fume capture
    Automated welding

    Robotic cells

    Capture devices built into the cell or the torch, designed around the robot and its path.

FILTER

Mobile extractor or centralised network.

The choice depends on the number of workstations, arc time and the volume of air to treat.

01

Filtering extractor at the workstation

Extractors with articulated arm: air is drawn in through the adjustable hood, then passes through a flow distributor, a synthetic pre-filter and a high-efficiency filter.

  • EX 1000 · EX 2000 · EX 3000
  • FM 1000 · FM 2000
  • CUBIC 1500
  • 1,000 to 3,000 m³/h
02

Central network

For a workshop with several stations: a fan draws fumes from all hoods through a duct network into a filter unit. An activated carbon stage can be added for odours.

  • Low and medium pressure fans
  • Activated carbon option for odours
  • Centralised network, several workstations

OUR METHOD

From the workstation to discharge.

Every welding workshop is different: we start from the process and the workstations, not from a catalogue.

  1. 01Identify the process

    MIG, MAG, TIG, plasma or thermal cutting, metals welded and arc time.

  2. 02Count the workstations

    Single workstation, line of workstations or robotic cell, and whether they run simultaneously.

  3. 03Choose the capture method

    Arm, table or cell hood, as close as possible to the arc without hindering the welder.

  4. 04Filter and discharge

    Extractor at the station or central network, chosen according to the number of stations and arc time.

PROCESSES COVERED

  • MIG and MAG welding
  • TIG welding
  • Arc welding
  • Robotic cells
  • Plasma cutting
  • Thermal cutting

CAPTAIR & DIMAVENT / ENGINEERING OFFICE

How many welding workstations?
Let's talk about your workshop.

Processes used, number of workstations, part sizes and whether robots are used: a few details are enough to propose the right capture and filtration.

Contact us

What happens when you contact us.

Every request is read by a technician from our engineering office, who gets back to you if anything needs clarifying.

Reply within 48 working hours.

Your request, step by step

  1. 1

    You describe your needs

    Pollutant, workstations, constraints: a few lines are enough. A photo of the installation helps us a lot.

  2. 2

    Our engineering office studies it

    Capture, airflow, ductwork and filtration are sized for your site, together with you if anything needs clarifying.

  3. 3

    You receive a written proposal

    Machine, options and price, in detail: you decide with full knowledge of the facts.

  • Since 1994in industrial air treatment
  • In-house engineering officefrom design to supply
  • All brandsfilters and spare parts
  • French Fabnetwork member
Call Contact us