Spiral duct
Sturdy, versatile and cost-effective: galvanised duct for general ventilation, extraction, supply air and make-up air networks.
06 / VENTILATION & DUCTWORK
Spiral and smooth ducts from Ø 80 to 1,000 mm, fittings, and low and medium pressure fans up to 170,000 m³/h: we size and supply your ventilation and extraction networks.
Galvanised steel, pressed fittings
Ø 80 to 1,000 mm
Fast quotes from drawings or lists
Engineering office and technical advice
OUR DUCTWORK SOLUTIONS
Spiral duct, lock-seamed in a helix, is rigid and economical: it is the duct for general ventilation. Smooth clamp-fitted duct has no internal seam: lower pressure loss and fewer deposits, it is the duct for dust extraction.
Get a quote for my ducts Sizing
Sturdy, versatile and cost-effective: galvanised duct for general ventilation, extraction, supply air and make-up air networks.
Smooth inner surface and clamp assembly: lower pressure losses, and a dust collection network that can be modified as the workshop changes.
NETWORK COMPONENTS
Bends, branches, reducers, dampers and valves in the diameter of your ducts. Send your drawing or parts list: we quote the whole network.
Contact us
Bends
Pressed or segmented, various angles and radii to keep pressure losses under control.
Branches
Tees, Y-branches and take-offs to distribute airflow between branches.
Reducers
Transitions and cones to change duct sections gradually.
Dampers
Butterfly dampers with adjustment handle to isolate and balance branches.
Control valves
Pneumatically operated blast gates to open or close a workstation.
Silencers
Reduce noise transmitted by the network and the fan.
Roof outlets
Flashings and collars for roof penetration and discharge.
VENTILATION RANGE
Seven low and medium pressure ranges for extraction, supply air and conveying pollutants, from clean air to air laden with chips. Steel or stainless construction, high-temperature and ATEX versions.
Size my fan
Centrifugal fans
Low pressure · BP · BPR
Centrifugal fans
Medium pressure · EU · EUK · MPR · TR
Roof extractors
Roof extraction · BT
| Range | Family | Airflow | Total pressure | Documentation |
|---|---|---|---|---|
| BP | Low pressure | 180 – 20 100 m³/h | 150 – 2 160 Pa | Data sheet on request |
| BPR | Low pressure | 1 320 – 170 000 m³/h | 100 – 3 820 Pa | Data sheet on request |
| Tourelle BT | Low pressure · roof | 1 300 – 15 000 m³/h | 130 – 1 050 Pa | Data sheet on request |
| EU | Medium pressure | 380 – 70 000 m³/h | 440 – 5 390 Pa | Data sheet on request |
| EUK | Medium pressure | 800 – 150 000 m³/h | 690 – 10 740 Pa | Data sheet on request |
| MPR | Medium pressure | 380 – 6 700 m³/h | 1 470 – 5 880 Pa | Data sheet on request |
| TR | Medium pressure | 1 320 – 105 000 m³/h | 880 – 8 830 Pa | Data sheet on request |
Pressures converted from the data sheets in kgf/m² (1 kgf/m² = 9.81 Pa) and rounded. Indicative ranges depending on the model: the operating point is validated by the network calculation.
CAPTAIR & DIMAVENT / ENGINEERING OFFICE
Network, fan, filtration and capture must work together. We select the components to build an airflow chain consistent with your application.
Contact us
Every request is read by a technician from our engineering office, who gets back to you if anything needs clarifying.
Reply within 48 working hours.
Your request, step by step
Pollutant, workstations, constraints: a few lines are enough. A photo of the installation helps us a lot.
Capture, airflow, ductwork and filtration are sized for your site, together with you if anything needs clarifying.
Machine, options and price, in detail: you decide with full knowledge of the facts.
Your cookie choices
With your consent, we use audience and advertising measurement cookies to understand how the site is used, improve it and see which ads bring us enquiries. You can accept, refuse or choose, and change your choice at any time. Learn more