French industrial expertise · Since 1994

BHS-H
Oil mist filter

An oil mist filtration housing installed at height, connectable directly above a CNC machine to free up floor space.

Technical data sheet available in French.

600 – 3 600m³/h
4models
BHS-HElevated installation

01 / The right application

Elevated installation

The BHS-H treats oil mist while preserving workshop floor space. Its elevated installation is suitable for connection above a CNC machine. Models 500, 1000, 2000 and 3500 offer airflow rates from 600 to 3,600 m³/h according to the technical table.

Contact us
01Frees up floor space
02Connection above the machine
03Condensate drainage

02 / How it works

BHS-H

  1. At the inlet, mist laden air strikes the droplet separator, where the mist condenses.
  2. The air then passes through a very high efficiency protection filter.
  3. Condensate is collected and drained through a pipe beneath the unit.
Oil mist filter CAPTAIR BHS-H

03 / Technical specifications

Technical specifications

BHS-H — Technical specifications
ModelAirflow
m³/h
Pressure
mm WC
Power
kW
W × D × H
mm
500600800.37970 × 385 × 615
10001 2001100.751 140 × 525 × 525
20002 4001201.51 260 × 675 × 675
35003 600902.21 285 × 675 × 675

Values from the technical data sheets. General range summaries may differ from individual model values; the table details the listed configurations. Final selection depends on the operating point.

04 / Options and variants

Options and variants

Options are selected according to the pollutant, ductwork and operating conditions.

  • Visual or audible filter clogging indicator

Your industrial project

Select the right equipment.

Tell us about the pollutant, the required airflow and your production schedule. Our team will help you select the model and its options.

Contact us

Let’s talk about your installation.

A technician from our engineering office studies your needs and proposes the right solution for your workshop: machine, capture, ductwork and filtration.

Reply within 48 working hours.

Your request, step by step

  1. 1

    You describe your needs

    Pollutant, workstations, constraints: a few lines are enough. A photo of the installation helps us a lot.

  2. 2

    Our engineering office studies it

    Capture, airflow, ductwork and filtration are sized for your site, together with you if anything needs clarifying.

  3. 3

    You receive a written proposal

    Machine, options and price, in detail: you decide with full knowledge of the facts.

  • Since 1994in industrial air treatment
  • In-house engineering officefrom design to supply
  • All brandsfilters and spare parts
  • French Fabnetwork member
Call Contact us