French industrial expertise · Since 1994
Bag-type DA
Industrial dust collector
A compact, economical dust collector for workstations producing small quantities of dust. Its filter bag is removable for cleaning.
Technical data sheet available in French.
01 / The right application
Low dust loads
The bag-type DA range meets low dust load filtration needs where space matters. Models 85, 100 and 125 are available in low or medium pressure configurations. There is no integrated filter cleaning system: the bag is removed for cleaning.
Contact us02 / How it works
Bag-type DA
- The fan creates negative pressure and draws dust laden air into the filter bag.
- Fine dust is retained by the bag; filtered air exits from the lower part of the unit.
- The top cover provides access to the filter, which is removed for cleaning.

03 / Technical specifications
Technical specifications
| Model | Airflow m³/h · BP / MP |
Pressure mm WC · BP / MP | Power kW · BP / MP | W × D × H mm |
|---|---|---|---|---|
| 85 | 500 / 250 | 180 / 250 | 0.75 / 0.55 | 435 × 445 × 1 055 |
| 100 | 1 000 / 400 | 250 / 270 | 1.1 / 0.75 | 500 × 510 × 1 250 |
| 125 | 2 000 / 500 | 300 / 420 | 3 / 1.5 | 685 × 695 × 1 500 |
BP: low pressure · MP: medium pressure. Values from the technical data sheets. General range summaries may differ from individual model values; the table details the listed configurations. Final selection depends on the operating point.
2 mm electrogalvanised steel with epoxy powder coating. 400 V supply. Spare parts available for 10 years.
04 / Options and variants
Options and variants
Options are selected according to the pollutant, ductwork and operating conditions.
304 / 316 L stainless steel variants and different orientations to suit the layout.
PTFE or antistatic filter media depending on configuration.
Your industrial project
Select the right equipment.
Tell us about the pollutant, the required airflow and your production schedule. Our team will help you select the model and its options.
Contact us
Let’s talk about your installation.
A technician from our engineering office studies your needs and proposes the right solution for your workshop: machine, capture, ductwork and filtration.
Reply within 48 working hours.
Your request, step by step
-
1
You describe your needs
Pollutant, workstations, constraints: a few lines are enough. A photo of the installation helps us a lot.
-
2
Our engineering office studies it
Capture, airflow, ductwork and filtration are sized for your site, together with you if anything needs clarifying.
-
3
You receive a written proposal
Machine, options and price, in detail: you decide with full knowledge of the facts.
- Since 1994in industrial air treatment
- In-house engineering officefrom design to supply
- All brandsfilters and spare parts
- French Fabnetwork member

DA
DAS
DAS CC
HYDRO