French industrial expertise · Since 1994
HYDRO
Industrial dust collector
A wet dust collector for certain sensitive or sticky dusts, mixing the dust laden air with water.
Technical data sheet available in French.
01 / The right application
Wet dust collection
The HYDRO range uses wet collection for sensitive dusts, including aluminium or magnesium, as well as certain sticky dusts. It is designed for continuous 24/7 operation, with limited maintenance and low water consumption. Suitability for the pollutant and process is confirmed through risk assessment.
Contact us02 / How it works
HYDRO
- Dust laden air is mixed with water in a swirling zone. Captured particles settle at the bottom of the tank.
- The air passes through a droplet eliminator. The water level remains visible through a sight tube.
- Sludge is brought up by scraping and the drain is located at the bottom.

03 / Technical specifications
Technical specifications
| Model | Airflow m³/h |
Pressure mm WC | Power kW | W × D × H mm |
|---|---|---|---|---|
| 150 | 600 | 90 | 0.75 | 725 × 875 × 1 825 |
| 200 | 2 000 | 150 | 2.2 | 875 × 1 105 × 2 080 |
| 250 | 3 500 | 140 | 4 | 1 095 × 1 330 × 2 560 |
| 500 | 5 000 | 150 | 7.5 | 1 240 × 1 500 × 3 160 |
Values from the technical data sheets. General range summaries may differ from individual model values; the table details the listed configurations. Final selection depends on the operating point.
2 mm electrogalvanised steel with epoxy powder coating. 400 V supply. Spare parts available for 10 years.
04 / Options and variants
Options and variants
Options are selected according to the pollutant, ductwork and operating conditions.
304 / 316 L stainless steel variants and different orientations to suit the layout.
Your industrial project
Select the right equipment.
Tell us about the pollutant, the required airflow and your production schedule. Our team will help you select the model and its options.
Contact us
Let’s talk about your installation.
A technician from our engineering office studies your needs and proposes the right solution for your workshop: machine, capture, ductwork and filtration.
Reply within 48 working hours.
Your request, step by step
-
1
You describe your needs
Pollutant, workstations, constraints: a few lines are enough. A photo of the installation helps us a lot.
-
2
Our engineering office studies it
Capture, airflow, ductwork and filtration are sized for your site, together with you if anything needs clarifying.
-
3
You receive a written proposal
Machine, options and price, in detail: you decide with full knowledge of the facts.
- Since 1994in industrial air treatment
- In-house engineering officefrom design to supply
- All brandsfilters and spare parts
- French Fabnetwork member

Bag-type DA
DA
DAS
DAS CC