French industrial expertise · Since 1994
M5 to F9 bag filters for ventilation
M5 to F9 bag filters for air handling units and ventilation boxes, all makes: frame size, number and length of bags to match your filter.

01 / Bag filters
Why a bag filter
The bags multiply the filter area within a standard frame size. At the same airflow, the air passes through the medium more slowly: the pressure drop is lower and the filter lasts longer than a flat filter of the same class.
They are mainly used as a second stage, after a G4 pre-filter, in air handling units and ventilation boxes.
02 / Bag filters
From M5 to F9: choosing the class
Bag filters cover classes M5 to F9 of the former EN 779 standard, i.e. ISO ePM10 to ISO ePM1 under ISO 16890.
F7 is the usual choice on the fresh air of an air handling unit. F9 is used ahead of finer filtration or in the most demanding rooms.
03 / Bag filters
The characteristics to note
The frame size (often 592 × 592 mm, 592 × 287 mm or 287 × 592 mm), the number of bags, their length, the frame material and the class. This information is usually on the filter label.
The medium is synthetic or glass fibre: keep the same material as the original filter, unless the unit manufacturer specifies otherwise.
04 / Bag filters
Replacing and fitting correctly
A bag filter is replaced when its pressure drop reaches the final value set by the manufacturer, read on the unit’s pressure gauge.
Fit the bags vertically, without folds and without touching the walls: a crushed bag no longer filters over its whole surface.
Useful answers
Frequently asked questions
How many bags should I choose?
For the same frame size, more bags means more filter area, so a lower pressure drop and a longer life. Keep the original number, or ask us if you want longer intervals between replacements.
Bag filter or compact filter?
The bag filter is more economical; the rigid compact filter is shallower and copes better with airflow variations. The choice depends mainly on the space available in the unit.
Which class for the fresh air of an air handling unit?
Most often an F7, preceded by a G4 pre-filter. Some rooms require more, for example an F9.
Continue your selection
Related solutions and guides
Your industrial project
Tell us what you need.
Send us a photo of the label or the dimensions of your filters, with the class and the quantity: we reply with the reference and a quote.
Contact us
Let’s talk about your installation.
A technician from our engineering office studies your needs and proposes the right solution for your workshop: machine, capture, ductwork and filtration.
Reply within 48 working hours.
Your request, step by step
-
1
You describe your needs
Pollutant, workstations, constraints: a few lines are enough. A photo of the installation helps us a lot.
-
2
Our engineering office studies it
Capture, airflow, ductwork and filtration are sized for your site, together with you if anything needs clarifying.
-
3
You receive a written proposal
Machine, options and price, in detail: you decide with full knowledge of the facts.
- Since 1994in industrial air treatment
- In-house engineering officefrom design to supply
- All brandsfilters and spare parts
- French Fabnetwork member
